BXXRX - 01956 TEXCLAD 2
- MSDS: BXXRX
- Manufacturer: TEXACO LUBRICANTS CO
- Product Name: 01956 TEXCLAD 2
- National Stock Number: 9150-00N060847
Product Identification
Product ID:01956 TEXCLAD 2
MSDS Date:12/08/1993
FSC:9150
NIIN:00N060847
MSDS Number: BXXRX
Responsible Party
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 914-838-7204
Cage: OTTJ3
Contractor
Telephone: 804-527-4311
Cage: OTTJ3
Ingredients
20.00 - 34.99.
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: <35%
OSHA PEL 15 MPPCF; Z-3
ACGIH TLV: 2 MG/M3 RDUST
10.00 - 19.99.
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: <20%
OSHA PEL N/K
ACGIH TLV: 5 MG/M3; (FUME)
3.00-9.99.
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: <10%
OSHA PEL 5 MG MO/M3
ACGIH TLV: 5 MG MO/M3
MINERAL OIL,PETRO DISTILLATE,HYDROTREATED (SEVERE), HEAVY
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: <50%
OSHA PEL N/K
ACGIH TLV: N/K
10-19.99
CAS: 64755-01-7
Fraction By Weight: <20%
OSHA PEL N/K
ACGIH TLV: N/K
100.
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
RESIDUAL MATL CAN RESULT IN DISFIGUREMENT, LOSS
RTECS: 9999999ZZ
EXTENT OF INJURY CANNOT BE DETERMINED BY EXAMINING
RTECS: 9999999ZZ
SHEATHS OR SOFT TISSUE.
RTECS: 9999999ZZ
THIS IS BECAUSE PRODUCT USES,
RTECS: 9999999ZZ
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE &
RTECS: 9999999ZZ
CLEANED AT LEAST ONCE A WEEK.
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >5 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: MINIMAL IRRIT, EXPER AS
TEMP DISCOMFORT. SKIN: BRIEF CONT IS NOT IRRIT. PRLNGD CONT, AS
W/CLTHG WETTED W/MATL, MAY CAUSE DEFATTING OF SKIN/IRRIT, SEEN AS
LOC REDNESS W/POSS MILD DISCOMFORT . INHAL: PROD NOT VOLAT AT
AMBIENT TEMPS. INGEST: IF MORE THAN SEVERAL MOUTHFULS ARE
SWALLOWED, ABDOM(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DISCOMFORT, NAUS & DIARR MAY OCCUR.
OTHER: MATL FROM HIGH PRESS EQUIP, PINHOLE LEAKS/HIGH PRESS LINE
FAILURE CAN PENETRATE SKIN & IF NOT PROPERLY TREATED CAN CAUSE
SEVERE INJURY, INCL DISFIG UREMENT, LOSS OF FUNCTION/EVEN REQ
AMPUTATION OF AFFECTED AREA. TO PVNT SUCH SERIOUS INJURY, IMMED MED
ATTN (SUPDAT)
Medical Cond Aggravated by Exposure:BECAUSE OF ITS DEFATTING
PROPERTIES, PRLNGD & RPTD SKIN CONTACT MAY AGGRAVATE AN EXISTING
DERMATITIS (SKIN CONDITIONS).
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR SEVERAL MINS. GET MED ATTN
IF EYE IRRIT PERSISTS. SKIN: WASH W/PLENTY OF SOAP & WATER FOR
SEVERAL MINS. GET MED ATTN IF SKIN IRRIT DEVELS/PERSISTS. INGEST:
IF MORE TH AN SEVERAL MOUTHFULS HAVE BEEN INGESTED, GIVE 2 GLASSES
OF WATER(16 OZ). GET MED ATTN. INHAL: IF IRRIT/DROW OCCURS, REMOVE
TO FRESH AIR. NOTE TO MD: HIGH PRESS INJECTION OF MATL INTO SKIN,
IF(SUPDAT)
Fire Fighting
Extinguishing Media:ACCORDING TO NFPA GUIDE USE WATER SPRAY, DRY CHEM,
FOAM/CARBON DIOXIDE. WATER/FOAM MAY CAUSE FROTHING.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
USE WATER TO COOL FIRE-EXPOSED CNTNRS. IF LEAK/SPILL HAS NOT IGNIT,
USE WATER SPRAY TO DISPERSE(SUPDAT)
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:CONTAIN SPILL IF POSSIBLE. CONTAIN WITH
ABSORBENT MATERIALS SUCH AS CLAY OR SOIL & SHOVEL UP. AVOID SKIN &
EYE CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MINIMUM FEASIBLE HANDLING TEMPS SHOULD
BE MAINTAINED. PERIODS OF EXPOSURE TO HIGH TEMPERATURES SHOULD BE
MINIMIZED. WATER CONTAM SHOULD BE AVOIDED.
Other Precautions:REMOVE & DRY-CLEAN/LAUNDER CLTHG SOAKED/SOILED W/MATL
BEFORE REUSE. DRY CLEANING OF CONTAMD CLTHG MAY BE MORE EFFECTIVE
THAN NORMAL LAUNDERING. INFORM PERS RESPONSIBLE FOR CLEANING OF
POTNTL HAZARDS A SSOC W/HANDLING CONTAMD CLTHG.
Exposure Controls
Respiratory Protection:AIRBORNE CONC SHOULD BE KEPT TO LOWEST LEVELS
POSS. IF VAP, MIST/DUST IS GENERATED, USE RESP APPRVD BY NIOSH/MSHA
AS APPROP. SUPPLIED AIR RESP PROT SHOULD BE USED FOR CLEANING LGE
SPILLS/UPON ENTRY IN TO TANKS, VESSELS/OTHER CONFINED SPACES.
Ventilation:ADEQUATE TO MEET COMPONENT OCCUPATIONAL EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:WORKERS SHOULD WASH EXPOSED SKIN SEVER
Supplemental Safety and Health
Chemical Properties
Vapor Pres:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK SEMI-SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOX LEVELS OF CARBON MONOXIDE &
DIOXIDE, IRRIT ALDEHYDES & KETONES & COMBUST PROD/CMPDS OF CALCIUM,
MOLYBDENUM,(SUPDAT)
Disposal
Waste Disposal Methods:PROD HAS BEEN EVAL FOR RCRA CHARACT & DOES NOT
MEET CRITERIA OF HAZ WASTE IF DISCARDED IN ITS PURCHASED FORM.
UNDER RCRA, IT IS RESPONSIBLITY OF USER OF PROD TO DETERMINE AT THE
TIME OF DISP, WHETHER PROD MEETS RCRA CRITERIA FOR HAZ
WASTE.(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.